
Add to Cart
Follow recommended P.W.B. piercing plan in outside drawing page.
Please be cautions not to give excessive static load or shock to swiches.
Following the soldering process,do not try to clean the switch with a solvent or the like.
Safeguard the switch assembly against flux penetration from its topside.
Preservation under high temperature and high high humidity or corrosive gas should be
avoided Especially . When you need to preserve for a long period ,do not open the carton.
Spec.
Model No. | TS-J005 | |
Terminal Type | SMD | |
Switch Rating | 50mA DC 12V | |
Operation Travel | 0.2±0.1mm | |
Operation Tpye | Momentary | |
Operation Force | 160/180/250 gf | |
Operation Life | 300,000 Cycles | |
Contact Resistance | ≤100mΩ max | |
Insulation Resistance | ≥100MΩ/m DC 250V | |
Dielectric Strength | AC 250V/m 50Hz | |
Operation Temperature | -30℃ to + 85℃ | |
Operation Humidity | 25-85% RH | |
Solder Ability | 260±5℃ for 3 seconds |
Drawing.